4 posters
Altima on dyno at PSI
turkeySandwich- Posts : 77
Join date : 2008-12-28
Age : 40
Location : Hillsboro, OR
- Post n°1
Altima on dyno at PSI
turkeySandwich- Posts : 77
Join date : 2008-12-28
Age : 40
Location : Hillsboro, OR
- Post n°2
Re: Altima on dyno at PSI
Anyone else interested in putting their car on the dyno?
matt_to_the_v- Moderator
- Posts : 212
Join date : 2008-12-23
Location : Poulsbo,WA
- Post n°3
Re: Altima on dyno at PSI
i kinda do but its a little far for me to go lol.
3rdgen2.5s- Posts : 49
Join date : 2009-02-05
Age : 36
Location : Yakima, WA
- Post n°4
Re: Altima on dyno at PSI
Is the graph just cut off or did they let off before redline and only go to 5800 rpm? Also the torque seems to low and usually a stock QR will put down more TQ than HP. Would make more sense if it was 126 HP and 138 TQ.
turkeySandwich- Posts : 77
Join date : 2008-12-28
Age : 40
Location : Hillsboro, OR
- Post n°5
Re: Altima on dyno at PSI
he did some quick runs. the guy needed to go home. this was the best run out of 4. it's an automatic if that matters.
3rdgen2.5s- Posts : 49
Join date : 2009-02-05
Age : 36
Location : Yakima, WA
- Post n°6
Re: Altima on dyno at PSI
Hmmm maybe more time instead of rushing would have made a difference in what he was doing but that still seems odd. Automatic or not normally the 2.5 puts down more torque. Oh well all dynos seem to read different.
turkeySandwich- Posts : 77
Join date : 2008-12-28
Age : 40
Location : Hillsboro, OR
- Post n°7
Re: Altima on dyno at PSI
ya he was just doing it for fun. they had a bet going see who could guess the whp.
cdc88- Posts : 114
Join date : 2009-01-08
Age : 35
Location : pasco, wa
- Post n°8
Re: Altima on dyno at PSI
whats the price to get one. its too far for me anyways, but would like to know
turkeySandwich- Posts : 77
Join date : 2008-12-28
Age : 40
Location : Hillsboro, OR
- Post n°9
Re: Altima on dyno at PSI
I believe it is $75. Let me verify that tomorrow.
|
|